The Tensator Automatic Gate is the ideal cost-effective access
control solution for any retail or corporate environment. When
teamed with Tensator’s sturdy fixed rail system, the
automatic gate creates the perfect entrance and/or exit to a
supermarket, convenience store, DIY store, leisure center or
corporate environment.
With a choice of left handed or right handed versions and a wide
variety of additional features, each gate can be customized to meet
individual customer requirements.
To guarantee optimum performance, Tensator conducts site surveys
prior to all installations of automatic gates to ensure the best
configuration for every customer’s environment. Our teams
provide a full installation service and the product comes with a 1
year warranty.
- Slim gate body – 4”diameter.
- 90 or 180 degree operation (90 degrees in both
directions).
- Left or right hand settings.
- Motor protection sleep mode.
- Choice of approach sensors and gate opening activations.
- Polished chrome finish.
- Adjustable gate mounted miniature radar approach sensor.
- Break out alarm facility with automatic re-setting.
- 3’ length gate arm with white infill panel and
international ‘Arrow’ and international ‘No
Entry’ symbol.
- Adjustable gate opening time ranging from 0-20 seconds to suit
individual requirements.
- Manual key switch operation enables customer deactivation of
the gate if required.
- Reverse activated alarm (can be deactivated if required).
- Low voltage power operation.
- Pre-set breakout torque.
Approach sensors and gate opening
activation
- Overhead ceiling mounted motion and presence detection
sensor.
- Key fob remote activation.
- Swipe card activation.
- Key pad/key switch activation.
- Intercom and remote activation.
Safety Sensors
- Gate mounted ultrasonic safety sensor.
Finish options
- Polished chrome (as standard).
- Satin chrome.
- Powder coated to any RAL color.
Break out alarm
- Audible generic alarm (as standard).
- Audible generic alarm plus visible flashing light.
- Voice options available for break out and reverse action
entry.
Arm configuration
- Customisable up to length of 3’.
- Full depth gate arm with infill panel.
- White arm infill panel with ‘arrow/’no entry’
graphic as standard.
- Colored or transparent infill panel on request.
- Emergency exit or customised graphics.
Gate Communication
- Hard wired gate communication link (as standard).
- Wireless RF type gate communication link.
- The slimmest automatic gate in the market place.
- When fitted in conjunction with Tensator’s Fixed Rail
System, it provides the perfect access control solution for a
distinguished entrance and exit route.
- Optional ultrasonic safety sensor ensures a gate arm
‘holding position’ when movement is sensed within a
defined zone. This safety device avoids any potential injury or
harm and when the zone is cleared automatic operation is
resumed.
- Motor protection sleep mode prevents motor damage if the gate
arm is blocked for more than 4 attempts.
- In the event of a power cut, the gate can be moved manually in
both directions.
- Can be linked to individual fire systems for continuous access
during emergency periods.
- If the gate is pushed in a reverse direction during operation,
the break out audio alarm releases a high pitch noise for 5 seconds
(before resetting) which automatically alerts nearby staff to
problems such as shop lifting.
- Ability to customise 3’ gate arm length to meet specific
requirements.
- Easy to reconfigure for new customer layouts and can be
integrated into existing control systems.
| Gate Height |
3’6” |
| Gate Body Diameter |
4” |
| Standard Gate Arm Length |
3’ |
| Gate Arm Depth |
10” |
